Interior Applications

Panelite        Ceilings Plus        VMZinc       GKD       PK-30      Wilkinson

panellite Logo

Panelite materials provide an unparalleled combination of aesthetics and performance for design and architecture. The company pioneered the translucent honeycomb panel in 1998 and continues to develop products expanding on the significant benefits of translucent composites. The focus is to provid materials that enrich architectural experience with their beauty and impress with their quality, while measurably conserving energy and resources.

 

Four things you can do with Panelite that you can’t do with glass:

Panelite Bonded Series panels are light-transmitting, light-weight and easy to install. Our honeycomb technology offers designers, contractors and installers many advantages over other translucent panel alternates.

Mitered Corners

Self-structural pre-fabricated mitered corners reduce labor costs and installation time, ensuring a clean, minimal aesthetic. You can’t do that with glass.

Curves On A Budget

Curved Panelite panels weigh roughly 16% as much as glass and are easy to handle. We offer 10 standard radii and a low per panel curving charge. Curved glass is specialized, expensive and hard to handle and replace.

Quick Build Installs

Panelite can be fabricated on site and installed with quick, clean detailing, ideal for quick-build projects such as trade show booths or pop-up displays. . Glass typically requires silicone joints that are visually obtrusive, and time-consuming and messy to execute.

Accommodate Systems

HVAC, sprinklers, etc. Unlike glass, Panelite panels can be cut to accommodate systems such as HVAC ducts, plumbing pipes, sprinklers, and more.

interior applications partitions
interior doors
panelite curves
backlit panels

Common Panelite Applications: Partitions, Doors, Curves, Backlighting.....etc.... see more here 

Need More Information?
Interested in Samples? Contact

 

 

 Cynthia Ortiz

(214) 799-3687 

cynthia@wadearch.com 

ceilings plus logoGone are the days when ceilings of office buildings and other public spaces were covered with plain, perforated tiles hanging from a rectilinear grid. Ceilings Plus® is a leading provider of modern, aesthetic ceiling products with beautiful finishes using a wide range of wood and metal finishes, giving any project a very high-end feel at competitive prices. 

THINK OUTSIDE OF THE GRID WITH CEILINGS PLUS®

Radians  

The shortest distance between two points of inspiration is often a curve. Perhaps that’s why architects throughout the ages have used vaults and domes. In the modern era, you might have your own reasons to use curved ceiling panels – such as creating increased clearance above a ceiling for ductwork, or to allow daylighting to penetrate deeper into a room. Lightweight, acoustical, and fully downward accessible, Radians® ceilings break the 3-dimensional barrier with a smoothness of gesture executed with uncompromising precision.

Illusions
Illusions™ ceilings began with a dream: what would be the ideal ceiling system? From the start, we knew it had to be great looking – with exciting finishes, a concealed suspension system, and panel sizes to match the visual scale of any space. Next we identified functional requirements, including optimum acoustics, light weight for easy handling and reduced load, full accessibility to above-ceiling services, and integration with lighting and other ceiling mounted fixtures. Finally, but not as an afterthought, we recognized that the ceiling had to be as sustainable and affordable as possible. Driven by this vision, Ceilings Plus created Illusions, the most successful metal and wood ceiling system in existence.

planx 

LINEAR CEILINGS – IMPROVED

Mirra™ linear metal ceilings have been popular for decades. Unlike conventional linear ceilings, Mirra is precision formed for added strength and a cleaner appearance. It is available in whatever sizes and spacings your project requires, and in a spectrum of metal and painted finishes. When we clad the same lightweight aluminum panels with Arboreal® or Sarantè® veneer, we call the product Planx™.  Find out more

 

Barz™

New Barz™ is unlike any panel system you have seen before. Now you can preassemble any sizes and spacings of slats, struts, strips, boards, beams, and other linear components into ultra-lightweight panels that allow easy installation and accessibility. To minimize weight, we make Barz from light gage aluminum. We brake-form instead of roll-forming to assure that members are straight and have tight-fitting joints.

Find out more

idea pad 

The Idea Pad from Ceilings Plus is a clever tool for architects and designers to explore the possibilities with Ceilings Plus. Equipped with magnetic finish samples, perforation patterns on clear plastic sheets, and a plethora of project images for inspiration, it is easy to visualize many design solutions for the project at hand. The newly redesigned Idea Pad is intended to replace the traditional info binders that would easily get lost in firms’ resource libraries.   Contact Us to request your copy today!

Need More Information?
Interested in Samples? Contact

 

 

Cynthia Ortiz

(214) 799-3687

cynthia@wadearch.com 

vmzinc logoThe VMZINC® brand name represents a full range of Titanium-Zinc products in the form of sheets, coils and manufactured products and systems. Zinc is a naturally occurring metal which is found in large quantities in the form of ore in the earth's crust. All operations, from the transformation of the ore to the production of rolled zinc and finished products, are carried out within the Umicore Zinc Group to which the VMZINC brand belongs.

All exterior facade systems can also be used on interior walls.

Countertops and bars have been made with zinc in Europe for decades ~ VMZinc

Interior Walls that Make a Statement 

With its contemporary style, streamlined design, sleek aspect and variety of shades, zinc is now an architectural element that can be used to enhance convivial spaces. Available in two heights - 590 and 890 mm, several lengths ranging from 590 to 2,490 mm and several shades: QUARTZ-ZINC, ANTHRA-ZINC and PIGMENTO, that can be blended harmoniously with other materials like wood, stone, slate, fabric, etc.

Find out more

VMZinc Counter Tops and Bars

Zinc is a long-lasting metal that changes color over time, giving the surface a seasoned look with inherent warmth that many other metals lack. In addition, because zinc is malleable and easy to work with, edges can be molded into decorative shapes and treatments for optimal design alternatives.

Find out more

Need More Information?
Interested in Samples? Contact

Bill Wade

 

 

Bill Wade

281-852-7900

bill@wadearch.com 

Christy Serafini

 

 

Christy Serafini

281-852-7900

christy@wadearch.com 

gkd logoGKD Metal Fabrics produces technologically advanced woven metal fabric solutions from concept to completion. With a broad spectrum of fabric designs, thicknesses, weights, rigidity, widths and transparency, GKD Metal Fabrics are suitable for diverse interior and exterior architectural applications and can help push your design to extraordinary heights.

Stairwell Appeal:  

A characteristic style element, which combines the highest aesthetic requirements as well as ease of installation, was needed for the designing of the stairways. Metal mesh, type Futura 3110, fulfilled these requirements and came into use at the stairwell area.

In the interplay with the lighting of the stairway, the reflective stainless steel mesh evokes fascinating light effects. In addition to the clamping at the top and bottom end, the metal mesh is attached to the stringers in both ascending and descending direction. Over 13 feet wide and about 36 feet tall rectangular mesh panels divide the stairwell. Due to its transparency, it provides the desired spacious and high-quality appearance.

Futura 3110:

GKD Metal Fabric Sunshading Façades offer significant energy saving, comfort, and a pleasant work environment by filtering light and providing transparent views to the outside.

There is no substitute for extraordinary design.

More applications of GKD metal fabrics for architectural design

Ceilings

Customize Furniture Options

Wall Partitions

Column Covers

Need More Information?
Interested in Samples? Contact

 

 

Cynthia Ortiz

(214) 799-3687

cynthia@wadearch.com 

PK-30 System is a meticulously designed and engineered aluminum glazing framework system providing a flexible, beautiful, environmentally friendly and cost effective way to divide interior space. It is suitable for both residential and professional interiors and can be used in widely varying configurations including sliding doors, hinged doors, pocket doors, folding walls and fixed panels.

Folding Doors

Centerfold is a high quality accordion wall hardware system for variable room partitions up to 39 feet in width. The suspension point for this system is located at the panel center. Extremely wide installations are possible without bottom guide channels.

 

Variofold is a high quality bi-folding wall system. A bottom guide channel provides firm stability for installations with more than two doors per side

 

Variotec is a sliding stacking solution. Its modular, pluggable track system will follow your plans around and into every corner, giving you free rein even for large-scale installations. You may neatly stack a virtually limitless number of panels in the parking area. The sliding/stacking top tracks may be bent to customer specifications within 15° to 90°

Fixed Panels and Curves Walls

Fixed panels up to 12 feet in height and up to 12 feet in width are standard. Vertical, horizontal or crossed mullions may be specified. All fixed panels have built-in height and side wall adjusters in order to accommodate out of level or plumb conditions. Fixed panels may be ganged together, and fixed panel-to panel connectors automatically set ¹⁄8" reveals between panels. Floor to ceiling and partial height fixed panels may be specified.

 

Segmented curved walls are possible with fixed panels or sliding stacking installations. The sliding stacking top tracks may be bent to customer specifications within 15° to 90°

Hinge or Pivot Doors

Swing door hinge options are offset pivot or center pivot. Hardware such as: door operators, door closers, electro-magnetic locks and electric strikes may be integrated into the system. Door heights of up to 12 feet are standard.

 

Sliding doors up to 10 feet in width and up to 12 feet in height are standard. PK-30 System sliding hardware fittings offer precision, safety and reliability and are proven in service for more than three decades. PK30 System offers innovative, efficient solutions for doors weighing up to 550lbs. FSB sliding door locks are standard, the sliding pocket door lock has an integral edge pull. They are available in a variety of keyed and non-keyed functions and FSB locks may be specified with standard North American cylinders allowing you to match building standard keyways.

Continuity of multi-functional architectural elements, a systematic, modern, precise design language from a single source manufacturer

Need More Information?
Interested in Samples? Contact

 

 

Cynthia Ortiz

(214) 799-3687

cynthia@wadearch.com 

Wilkinson Hi-Rise has evolved to meet its clients’ individual needs since 1923. As a leading force in the trash and linen chutes industry, Wilkinson Hi-Rise presents innovative solutions to waste control issues in office and apartment buildings, hospitals, sports arenas, hotels, restaurants and other multi-purpose complexes. 

Linen Chutes

Wilkinson Hi-Rise linen chutes are constructed of #16 gauge aluminized steel, galvanneal and several different grades of stainless steel. Options for thicker gauge steel are also available. All of our equipment carries a one (1) year warranty. Linen chutes are made to accommodate even the busiest hospital or hotel. The intake doors have also been specially designed to prevent broken closures.

read about more here

 

Trash Chutes

Wilkinson Hi-Rise trash chutes are constructed of #16 gauge aluminized steel, galvanneal and several different grades of stainless steel. Sound dampening coating can be applied to outside of chute to minimize noise emitted by the chute. Further sound protection is provided by applying a “wrap” insulation to the exterior of the chute. The floor frames of the chute are typically equipped with sound isolator pads at each floor connection point to isolate the chute from the floor of the structure.

read about more here

Need More Information?
Interested in Samples? Contact

Christy Serafini

 

 

Christy Serafini

(214) 799-3687

christy@wadearch.com